The 1975 dime is a fascinating piece of American currency that has captured the attention of collectors for decades.
Howbeit, do they have any significant value? Continue reading this piece to know about the varieties, errors, and grading of the 1975 dime.
1975 Roosevelt Dime Details
- Category: Roosevelt Dime
- Mints: Philadelphia, Denver, San Francisco
- Total mintage: Over 1.3 billion
- Observe designer: John R. Sinnock
- Reverse designer: John R. Sinnock
- Edge: Reeded
- Face Value: $0.10
- Diameter: 17.91 mm
- Thickness: 1.35 mm
- Composition: 75% copper, 25% nickel
- Weight: 2.27 g
1975 Roosevelt Dime Value Chart
Mint Mark | Good | Fine | Extremely Fine | Uncirculated |
1975 No Mint Mark Dime | $0.10 | $0.15 | $0.35 | $2 – $3 |
1975 “D” Roosevelt Dime | $0.15 | $0.15 | $0.2 | $3 |
1975 “S” Roosevelt Dime | $0.2 | $0.5 | $1 | $3 |
1975 Roosevelt Dime Values and Varieties Guide
1975 No Mint Mark Roosevelt Dime
- Type: Roosevelt Dime
- Edge: Reeded
- Mint Mark: None
- Place of Minting: Philadelphia
- Year of Minting: 1975
- Face value: $0.10
- $ price: $0.10 to $3.00 (or more)
- Quantity Produced: 586,673,000
- Designer: John R. Sinnock
Produced at the Philadelphia Mint, the 1975 P Roosevelt Dime belongs to a scarce category referred to as the “No Mint Mark” dime, owing to the absence of any mint mark. In a rare mishap, the Philadelphia Mint overlooked the inclusion of the “P” mint mark on a limited number of Roosevelt Dimes in 1975.
The 1975 “No Mint Mark” Roosevelt Dime is a 10-cent coin, which is the standard denomination for dimes in the United States. The obverse features a portrait of President Franklin D. Roosevelt, who was instrumental in the founding of the March of Dimes, an organization dedicated to fighting polio” to avoid plagiarism.
On the reverse, the coin features an image of a torch, an olive branch, and an oak branch. This design was created by John R. Sinnock, who was also responsible for designing the Franklin half-dollar.
Overall, the 1975 “No Mint Mark” Roosevelt Dime is an interesting and valuable variety that is highly prized by coin collectors. Its rarity and unique history make it a fascinating addition to any coin collection.
1975 “D” Roosevelt Dime
- Type: Roosevelt Dime
- Edge: Reeded
- Mint mark: D
- Place of minting: Denver
- Year of minting: 1975
- Face value: $0.10
- $ price: $0.15 to $3.00
- Quantity produced: 313,705,000
- Designer: John R. Sinnock
The 1975 D Roosevelt Dime is a dime coin that was minted by the United States Mint in Denver in 1975. It is a regular-issue coin that was produced as part of the Roosevelt Dime series, which began in 1946 to commemorate the life and achievements of President Franklin D. Roosevelt.
While the 1975 D Roosevelt Dime is a common coin and not particularly rare, it is still of interest to coin collectors for several reasons. For one, it was produced during a time of transition for the US Mint, as it was in the process of switching from using silver to copper-nickel clad for its coinage. The Roosevelt Dime was one of the first coins to be produced using the new clad composition, which was introduced in 1965.
The 1975 D Roosevelt Dime is an interesting and collectible coin that is part of the larger Roosevelt Dime series. While it may not be particularly rare or valuable, it is still an important piece of US coinage history and a worthwhile addition to any coin collection.
1975 “S” Roosevelt Dime (Proof)
- Type: Roosevelt Dime
- Edge: Reeded
- Mint mark: S
- Place of minting: San Francisco
- Year of minting: 1975
- Face value: $0.10
- Price: $0.10 to $3.00 (or more)
- Quantity produced: 2,845,450
- Designer: John R. Sinnock
The 1975-S dime had the lowest mintage of the three varieties but was more than enough, with over 2 million total mintage to meet the demand of collectors. Like every other proof coin, this coin wasn’t business struck, that is, not made to be released on circulation but primarily for collectors, so this coin may not be as popular as the other varieties in coin markets. Proof coins are usually struck with more detailing and kept in rugged plastic cases to maintain their lustre and brightness.
However, this coin is considerably easy to get, especially in low grades, but grades from PR69 Deep Cameo condition may be hard to find. Its value is between $0.40 and $15 but could be worth more in an open market.
1975 No-S Roosevelt Dime (Proof)
- Type: Roosevelt Dime
- Edge: Reeded
- Mint mark: None
- Place of minting: San Francisco
- Year of minting: 1975
- Face value: $0.10
- Price: $0.10 to $3.00 (or more)
- Quantity produced: No mintage estimate
- Designer: John R. Sinnock
While the other three varieties of the 1975 Dime are the official ones, the 1975 No-S dime was a variant made in San Francisco but without a mint mark! It was an error made by the San Francisco mint and turned out to be one of the most expensive modern coins ever. And more interestingly, there are only two examples of this coin, with the first discovered in 1977. The coin was sold for $516,000 in 2019, ranking as one of the highest-sold coins in history.
However, one of the major concerns of people is how this coin can be differentiated from the 1975 dime minted in Philadelphia since they both have no mint mark. A significant difference is the finish of the coin. While the 1975 Dime is a business-struck coin, the 1975 No-S is a proof coin and has a more detailed and glossier finish. And as already stated, this coin is worth a fortune. So, if you ever come across a 1975 No-S dime, and note, that is almost impossible; then you have a rare gem.
Also Read: Top 15 Most Valuable Roosevelt Dimes Worth Money
History of the 1975 Roosevelt Dime
Franklin D. Roosevelt died in 1945 from polio, following his support for the March of Dimes to fight the disease and lead the country through the Great Depression and World War II. So, the Roosevelt Dime was minted as an honour to him and his leadership.
A bill was proposed for the Roosevelt Dime to replace the Mercury dime. It was supported by everyone except the editor of The Numismatist, Stuart Mosher, who claimed that the Mercury dime was a beautiful design and Roosevelt should be made on a silver dollar instead. This was turned down on the ground that the silver dollar was on the level of presidents like Washington and Lincoln, which Roosevelt had yet to earn despite his achievements.
Thus, the new coin was approved and designed by the Chief engraver John R. Sinnock, but his assistant Gilroy Roberts did much of the work involved in the coin’s preparation. First, Sinnock submitted a design with a portrait of Roosevelt on the obverse and a hand holding a torch alongside sprigs of olive and oak. He also submitted other alternative designs, but they were all rejected. Finally, Sinnock made several modifications to the design and several models after the design was approved.
The final and current design of the Roosevelt Dime has a bust of Roosevelt on the obverse facing left directly opposite the word “LIBERTY”; under his chin is the inscription, “IN GOD WE TRUST” and the year of minting “1975” under his neck. The mint mark can be found above the year of minting, which is “D”, “S”, or no mint mark. Also, beneath the mint year is an inconspicuous “JS”, which are the initials of the designer, John Sinnock.
On the other hand, the coin’s inverse depicts an image of a torch representing liberty with olive and oak sprigs at either side, symbolizing peace and independence/strength, respectively. Inscriptions on the reverse include the Latin phrase, “E PLURIBUS UNUM”, stretching from left to right on the centre, “UNITED STATES OF AMERICA” along the top, and the coin’s value, “ONE DIME” beneath the Torch.
The Roosevelt dime was released in 1945 and has since been severally produced. It was at first made of several but later changed to a base metal composition in 1965. But the coin’s design has not been changed until this day.
1975 Roosevelt Dime Grading
When grading a 1975 dime, it is important to consider both its wear and tear as well as its luster and surface condition to accurately determine its grade. In addition, any scratches, nicks, or other imperfections on the surface of the coin can also affect its grade.
Grading a coin like the 1975 dime can be a challenging task. You can consult a professional coin grader to accurately assess the coin’s condition and provide an objective opinion on its grade. Also, you can personally inspect the coin to have a glimpse of its worth.
Watch this video to know the real value of your coin.
1975 Roosevelt Dime Errors
As with other coins, there’s a high chance that there’ll be error coins, especially for coins minted in large quantities. Some of the 1975 dime error coins include;
1. 1975 Dime Filled Die Error
The 1975 dime filled die error is a coin that has gained significant attention from coin collectors and enthusiasts. This error coin was created when a die used in the production process was not properly cleaned, resulting in excess metal filling the design elements on the die. This caused the design on the coin to appear thicker and more pronounced than usual, making it a unique and sought-after piece for collectors.
The 1975 dime filled die error is considered a very rare occurrence. According to the Professional Coin Grading Service (PCGS), only a handful of these coins have been certified and graded. In fact, as of my knowledge cutoff in 2021, PCGS had only certified 11 examples of this error coin, with the highest grade being MS64.
Due to its rarity and unique nature, the 1975 dime filled die error has a significant value among collectors. In fact, in 2016, one of these coins sold at auction for over $20,000. This high value is due to the scarcity of the coin and its unique appearance.
2. Off-Center Strike Error
The 1975 off-center dime error occurred during the minting process when the dime was struck off-center, causing the design to be incomplete on one side and the blank planchet to be exposed on the other.
The off-center error dimes can vary in degree, with some being slightly off-center and others being extremely off-center, with the design almost entirely missing. The more off-center the coin, the more valuable it becomes.
As of 2021, the value of a 1975 dime off-center error can vary widely depending on its degree of off-center, condition, and rarity. A dime that is only slightly off-center and in average condition may be worth around $10-$20, while a dime that is extremely off-center and in excellent condition could be worth several hundred dollars or more.
3. Double Die
The 1975 Roosevelt dime double die error is a coin minted by the United States Mint in 1975 that has a noticeable double impression on the obverse side of the coin. This error was caused by a misalignment in the die during the minting process, resulting in a distinct doubling of the date, motto, and other features.
In 2021, the value of the 1975 Roosevelt dime double die error ranged from a few hundred dollars for lower-grade specimens to several thousand dollars for high-grade specimens.
4. Die Crack
The 1975 Roosevelt dime die crack error is another type of error coin minted by the United States Mint in 1975. Unlike the double die error, the die crack error features a noticeable crack or break in the die used to mint the coin, resulting in a corresponding raised line or indentation on the coin’s surface.
This error is relatively rare and only a few thousand exists. The value of the 1975 Roosevelt dime die crack error ranged from a few hundred dollars for lower-grade specimens to several thousand dollars for high-grade specimens. The highest known sale of a 1975 Roosevelt dime die crack error was in 2018, when an MS-67 specimen sold for $7,050 at a public auction.
Check out this video for more error coins
FAQs
1. Is The 1975 Roosevelt Dime Rare?
No, the 1975 Roosevelt dime is not considered a rare coin. In fact, over 1.1 billion of them were minted.
2. Where Is The Mint Mark On A 1975 Dime Located?
The location of the mint mark on a dime from 1975 can be identified by looking between the cutoff of Roosevelt’s bust and the year 1975.
3. What Is A Proof 1975 Roosevelt Dime?
A proof 1975 Roosevelt dime is a coin specially struck for collectors using polished dies and specially prepared planchets.
Conclusion
Unlike previous dimes, which were made primarily of silver, the 1975 dime is made of a copper-nickel alloy.
Despite being one of the most common coins in circulation, it holds a special place in the hearts of coin collectors and history enthusiasts alike. Its design, though simple, is striking and memorable. Also, its relatively low mintage makes it a coveted addition to any collection.
Whether you’re a seasoned collector or simply appreciate the beauty of our nation’s currency, the 1975 dime is sure to capture your attention and leave a lasting impression.