Do you want to expand your coin collection with a rare and expensive coin? You might find just what you’re looking for in the 1967 half dollar. This particular coin is noteworthy because it was produced in the final year of the Kennedy half dollar series before the design was altered.
The 1967 half dollar was only produced in small quantities for collector sets, which makes it more difficult to locate than its forerunners and successors. In this article, we will discuss the 1967 half worth dollar and its history, along with the reasons why it is a desirable addition to any coin collection.
1967 Half Dollar Details
- Denomination: 50 cents
- Composition: 40% silver, 60% copper
- Weight: 11.50 grams
- Diameter: 30.61 mm
- Edge: Reeded
- Designer: Gilroy Roberts and Frank Gasparro
- Minted in: Philadelphia (no mint mark)
- Total mintage: 295,046,978
The Kennedy half dollar from 1967 is a great treasure in the world of coin collecting. Collectors have fallen in love with this magnificent coin because of its ageless design and stunning composition.
President John F. Kennedy’s life and legacy were honored with the creation of the Kennedy half dollar, which was initially struck in 1964. This famous coin’s 1967 version has a 40% silver and 60% copper composition, which increases its appeal and value. The coin’s size and weight make it a superb addition to any collection, weighing in at 11.50 grams and having a diameter of 30.61 mm.
The 1967 half-dollar, created by Gilroy Roberts and Frank Gasparro, has a striking portrait of the late president on the obverse along with the word “LIBERTY” above it and the year it was minted below. The motto “E PLURIBUS UNUM” and the denomination “50 CENTS” are printed above and below the presidential seal on the reverse.
The 1967 half dollar, which had a total mintage of 295,046,978 coins and was produced in Philadelphia, is a cherished example of American numismatic history. Although the coin is normally worth 50 cents in circulation, uncirculated versions can fetch much higher prices from collectors.
1967 Half Dollar Value Chart
|Mint Mark||Good||Fine||Extremely Fine||Uncirculated|
|1967 No Mint Mark Half Dollar Value||$2.00-$3.00||$3.00-$4.00||$3.00-$4.00||$5.00-$6.00|
1967 Half Dollar Value and Varieties Guides
1967 No Mint Mark Half Dollar Value
- Type: Kennedy Half Dollar
- Mark Category: Business Strike
- Materials: 40% silver, 60% copper
- Edge: Reeded
- Mint Mark: No Mint Mark
- Place of Minting: Philadelphia
- Year of Minting: 1967
- Face Value: 50 cents
- Price: $3.00 to $4.00 (in circulated condition), $10.00 to $20.00 (in uncirculated condition)
- Quantity: Total mintage of 295,046,978
- Designer: Gilroy Roberts and Frank Gasparro
- Mass: 11.50 grams
- Diameter: 30.61 mm
The 1967 Kennedy half dollar is a business strike currency that was produced in Philadelphia and lacked a mint mark. The coin has a reeded edge and is 60% copper and 40% silver in composition. Its designers were Gilroy Roberts and Frank Gasparro, and it has a diameter of 30.61 mm and weighs 11.50 grams.
The 1967 No Mint Mark Half Dollar has a very high mintage of approximately 300 million, but it is still a valuable coin for collectors. It can retail for between $3 and $4 in circulated condition, although uncirculated specimens can go for as much as $20 or more.
Its value is not just monetary, but also historical, representing a reminder of a time when America was striving to reach new heights and achieve its full potential.
1967 Half Dollar History
The fascinating history of the 1967 Kennedy half dollar reflects the turbulent era in which it was created. Only a few years after the assassination of President John F. Kennedy, for whom the currency is named, this piece was struck at a moment of considerable social upheaval and change in the United States.
In order to preserve the late president’s legacy, the U.S. Mint started creating the Kennedy half dollar in 1964. The striking design of the coin and the significance of its commemoration immediately captured the attention of the American public. Although the price of silver fluctuated over the years, the Kennedy half dollar was still produced, albeit with various amounts of silver.
The Kennedy half a dollar from 1967 is unique because it was produced at a period when silver prices were rising and the coin’s silver content was declining. By making this adjustment, the coin’s attraction was maintained while production costs were kept to a minimum.
In 1967, the United States Mint also issued two unique coins for collectors in addition to the standard Kennedy Half Dollars. The first was the Special Strike Kennedy Half Dollar, which had a distinctive and lovely appearance thanks to the use of polished planchets and a proof die.
The second was the SMS (Special Mint Set) Kennedy Half Dollar, which was only offered by mail order from the U.S. Mint and featured a different finish than regular circulation striking.
The 1967 Kennedy half dollar is a well-liked object and a fascinating piece of American history. Due to its unique design, high silver content, and historical significance, it continues to be a sought-after coin among numismatists. The Kennedy half-dollar from 1967 is a symbol of America’s enduring legacy and tenacity, whether it is held as a priceless relic or an investment in history.
In 2015, $22,325 was the highest amount ever paid for a 1967 No Mint Mark Half Dollar. Professional Coin Grading Service (PCGS) assigned this specific piece the grade of MS-68, which is regarded as a premium grade for a coin.
1967 Half Dollar Grading
When it comes to the hobby of coin collecting, a coin’s quality is essential to its overall value. You have probably heard of it, but there are a few things you should know. In 1967, the half dollar coin was still in circulation, and grading was just as significant then as it is now.
Because the 1967 half dollar was made of silver and was used often, it may have seen varied degrees of wear and corrosion. When grading this coin, it is essential to thoroughly inspect its surface, strike, shine, and any evidence of wear or corrosion.
If you would like to see how an expert grades a 1967 half dollar coin, you can check out this video.
List of 1967 Half Dollar Errors
Repunched mint marks
When the mint mark is struck on the coin more than once, it is known as a repunched mint mark since the marks clearly overlap. This may occur if the apparatus used to apply the mint mark a malfunction and strikes the mark more than once. The coin can be more distinctive due to this inaccuracy, but the value will vary depending on where and how much there is overlap.
An image that is distorted or doubled appears on the coin when the die used to strike it is double-engraved. There are several potential causes for this, including a misaligned die during production or when the die is abused and begins to shift slightly, striking the coin twice in various positions. The doubling effect varies in strength, and the more noticeable the doubling, the more valuable the coin.
Die breaks happen when the die used to strike the coin develops a fracture or a chip, causing the coin’s design to be distorted or lacking parts. Many factors, such as overusing the die, overheating, or an error in the manufacturing process, might cause this. A die break can result in elevated lines or blobs on the coin’s surface, which increases its collectibility and value.
A coin that is not correctly inserted into the press or a press that is not properly oriented will result in an off-center strike. This may lead to a design that isn’t aligned properly, leaving the coin’s edge occasionally blank and causing some design elements to stand out more than others. A coin’s weight may be altered by an off-center strike, either making it lighter or heavier than it should be.
Without a coin present, the obverse and reverse dies can collide and leave an impression of one design on the other die. This is referred to as a clashed die error, and the resulting design can occasionally be seen on the coin as a ghost picture or an illegible outline. If the conflicting designs are exceptionally distinct and well-defined, this error may be particularly beneficial.
Filled dies happen when an outside substance—such as grease or debris—gets stuck inside the die that strikes the coin. As a result, the coin’s design may be deformed, with some elements looking blurry. Moreover, the presence of a foreign object in the die might result in raised spots on the coin’s surface, increasing its rarity.
One example of this error can occur when a piece of cloth is stuck in the machine. As a result, a distinctive and frequently very collectible mistake may be created, leaving an impression of the fabric on the coin’s surface.
There may be a distinct impression of the weave or texture of the fabric or cloth on the coin in some cases. In other situations, the cloth might merely make a light or imperfect imprint on the coin’s surface.
1967 Half Dollar FAQ
What is the error on a 1967 half dollar?
Die breakage, off-center strikes, doubled dies, repunched mint marks, clashed dies, and filled dies are just a few of the many mistakes that might appear on the 1967 half-dollar. The type, extent, and general condition of the defect, as well as the value of the coin with the error, will all influence it.
Is a 1967 half dollar worth anything?
According to its condition, rarity, and demand among collectors, a 1967 half-dollar may indeed be worth something. The amount of silver in the coin—40% or not—will also affect its worth. In general, a circulated 1967 half dollar with no flaws or unique characteristics is worth 50 cents. A 1967 half-dollar, however, may be worth much more if it is in uncirculated condition or has a unique defect or variant.
How can I tell if my 1967 half dollar is silver?
The 1967 half dollar is made of 40% silver and 60% copper. By inspecting the edge, you can tell if your 1967 half dollar is made of silver. A 1967 half-dollar struck in silver will have a noticeable silver edge, while a 1967 half-dollar struck in copper-nickel will have a consistent brown edge.
Where is the mint mark on a 1967 half dollar?
You can see a 1967 half-mint dollar’s mark on the obverse side, beneath the words “In God We Trust” and to the right of the profile of President Kennedy. The coin’s mint mark identifies the U.S. Mint facility that struck it. Three different U.S. Mint facilities—Philadelphia (no mint mark), Denver (D mint mark), and San Francisco—produced the 1967 half dollar (S mint mark).
Why is the 1967 Kennedy Half Dollar rare?
In terms of mintage, the 1967 Kennedy Half Dollar is not regarded as rare. In fact, compared to many earlier Kennedy Half Dollar issues, it had a comparatively high mintage of close to 300 million. But besides that, there are numerous excellent 1967 half dollars in circulation. There are a few other uncommon and priceless coins from 1967 in addition to the highly sought-after variation of the Kennedy Half Dollar with faults.
The 1967 SMS (Special Mint Set) Kennedy Half Dollar is an example of such a coin. These coins were made exclusively for collectors and were manufactured using polished planchets and carefully prepared dies.
The SMS coins were only offered through mail orders from the U.S. Mint and feature a different finish than standard circulation striking. These coins can now be rather expensive, particularly in high grades.